Where can you anchor on Lake Thun?
Anchoring is not generally banned on Lake Thun. But shallow water near the shore does not, by itself, make a spot permitted or suitable.
Before dropping anchor
- Do not obstruct navigation. Keep harbour access and the manoeuvring space of scheduled passenger vessels clear. Anchoring near marked commercial fishing gear is prohibited.
- Check local anchoring bans and protected areas. An unmarked patch of water on a map is not proof that anchoring is allowed.
- Outside authorised berths, a boat may remain anchored or moored for more than 24 hours only if someone is aboard. This does not override local bans.
Why shallow water is not enough
You need three things: a permitted area, suitable holding ground and room for the boat to move. A depth chart only shows part of that picture. Closely spaced contours indicate a steep lakebed. You may need substantial chain or rope even close to shore, and a small movement can take you over much deeper water.
Imagine the spot after a wind shift: your boat may lie on the other side of its anchor. Assess the whole swinging area rather than just the current gap between two boats. The amount to pay out depends on depth, anchor type, chain or rope and conditions. It also needs to account for the height of the bow attachment above the water, rather than water depth alone.
After setting the anchor
First check that the anchor is holding: does the boat keep moving towards a landmark or continually change its distance from shore? An anchor alarm can draw attention to a position change. It cannot detect poor holding ground or another boat entering your swinging area. Reassess the spot if wind or waves increase.